Roll forming or roll forming is generally called the sheet forming process, this process is that we put the roll forming sheet on the coil holder and then the roll forming sheet is pulled into the roll forming machine through the feeder on the machine. The process of forming the sheet is done through the rollers on the machine, which are called stations.
رول فرم H مورد استفاده در ساخت گلخانه ها
رول فرم سینی تابلو مورد استفاده در تابلو های جاده ای
رول فرم تیزه مورد استفاده در صنعت ساختمان و شیروانی
DeCoiler used in forming line,at start of line to open sheet metal coil to feed forming machine
Used to reduce pressure on the Decoiler and Avoid tilting of Decoiler.
Generally in forming line that have Punching Machine to Adjust the speed before and after and increase the production speed of the forming machine we need loop
Used to pierce part of the design used in forming
Forming machine or rollform is a sheet forming machine that uses a number of rollers to forming sheet metal
It is generally used at the end of forming lines to cut the production workpiece which depending on the complexity or simplicity of the output product, uses a hydraulic guillotine or a band saw
This type of decoiler does not have any motor and hydraulic system and is generally used for lighter sheet rolls. The forming system itself has the ability to pull the sheet roll after taking the forming sheet and opening and closing the manual decoiler jaw is manually
Hydraulic coil holder is a type of coil holder that the opening and closing of the jaw is done by a hydraulic system, in the picture above, the hydraulic system can also be seen.
This type of coil is mostly used for heavier sheet rolls and the rotation and rotation of the roller is done by the motor, which is called electric coil, which can have a system of opening and closing the manual and hydraulic jaws.
This type of coil is used for very thick sheets and consists of two coils parallel to each other, and only few company can produce this kind of Decoiler